Compaq dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 66

System Board - bios update

Get Compaq dx2200 - Microtower PC PDF manuals and user guides View all Compaq dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Removal and Replacement Procedures- Microtower (MT) Chassis 6.14 System Board 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel (Section 6.2, "Access Panel"). 3. Remove the front bezel (Section 6.3, "Front Bezel"). 4. Disconnect the power, and data cables from the back of all installed drives. 5. Disconnect all cables from the system board. 6. Remove the heatsink from the system board (Section 6.12, "Heatsink"). 7. Remove the 6 screws that secure the system board to the chassis 1. 8. Slide the system board towards the front of the chassis 2 then remove it 3. ✎ The system board in the computer may look slightly different from the one shown here. To install the system board, reverse the removal procedure. ✎ After installing a new system board, always update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system ROM BIOS can be found on the Web at: http:\\h18000.www1.hp.com/support/files. 6-24 415606-001 Service Reference Guide, dx2200 MT

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
6–24
415606-001
Service Reference Guide, dx2200 MT
Removal and Replacement Procedures— Microtower (MT) Chassis
6.14 System Board
1. Prepare the computer for disassembly (
Section 6.1, “Preparation for Disassembly”
).
2. Remove the access panel (
Section 6.2, “Access Panel”
).
3. Remove the front bezel (
Section 6.3, “Front Bezel”)
.
4. Disconnect the power, and data cables from the back of all installed drives.
5. Disconnect all cables from the system board.
6. Remove the heatsink from the system board (
Section 6.12, “Heatsink”
).
7. Remove the 6 screws that secure the system board to the chassis
1
.
8. Slide the system board towards the front of the chassis
2
then remove it
3
.
✎
The system board in the computer may look slightly different from the one shown here.
To install the system board, reverse the removal procedure.
✎
After installing a new system board, always update the system ROM to ensure that the latest
version of the BIOS is being used on the computer. The latest system ROM BIOS can be found
on the Web at: http:\\h18000.www1.hp.com/support/files.