Compaq dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 44

Access Panel

Get Compaq dx2200 - Microtower PC PDF manuals and user guides View all Compaq dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Removal and Replacement Procedures- Microtower (MT) Chassis 6.2 Access Panel 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). Ä CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 2. Disconnect the power cord from the computer and from the power source 1. 3. Remove the two screws that secure the access panel to the computer chassis 2. 4. Slide the access panel back about 6 mm (1/4 inch), then rotate the top of the panel away from the chassis (pivot on the bottom) and lift it off the unit 3. To replace the access panel, reverse the removal steps. 6-2 415606-001 Service Reference Guide, dx2200 MT

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
6–2
415606-001
Service Reference Guide, dx2200 MT
Removal and Replacement Procedures— Microtower (MT) Chassis
6.2 Access Panel
1. Prepare the computer for disassembly (
Section 6.1, “Preparation for Disassembly”
).
Ä
CAUTION:
Before removing the computer access panel, ensure that the computer is turned off and that
the power cord is disconnected from the electrical outlet.
2. Disconnect the power cord from the computer and from the power source
1
.
3. Remove the two screws that secure the access panel to the computer chassis
2
.
4.
Slide the access panel back about 6 mm (1/4 inch), then rotate the top of the panel away from
the chassis (pivot on the bottom) and lift it off the unit
3
.
To replace the access panel, reverse the removal steps.