Compaq dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 92
Solving Power Supply Problems
View all Compaq dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Troubleshooting Without Diagnostics Solving Power Supply Problems Solving Power Supply Problems Problem Cause Power supply shuts down intermittently. Voltage selector switch on rear of computer chassis not switched to correct line voltage. Power supply fault. Computer powered off automatically and the Power LED flashes every four seconds. Processor thermal protection activated: A fan may be blocked or not turning. OR The heatsink/fan assembly is not properly attached to the processor. Solution Select the proper AC voltage. Replace the power supply. 1. Ensure that the computer air vents are not blocked and the cooling fan is running. 2. Open hood, press the power button, and see if the processor fan spins. If the processor fan is not spinning, make sure the fan's cable is plugged onto the system board header. Ensure the fan is fully/properly seated or installed. 3. Replace the processor fan. 4. Reseat processor heatsink and verify that the fan assembly is properly attached. E-4 415606-001 Service Reference Guide, dx2200 MT