Compaq dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 54
Drives
![]() |
View all Compaq dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.8 Drives The computer supports up to four drives that may be installed in various configurations. This Section describes the procedure for replacing or upgrading the storage drives. A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive. Ä CAUTION: Make sure personal files on the hard drive are backed up to an external storage device before removing the hard drive. Failure to do so will result in data loss. After replacing the primary hard drive, you will need to run the Restore Plus! CD to load the Compaq factory-installed files. 6.8.1 Drive Positions Drive Positions Item Description Item Description 1 Optical* drive 4 Internal hard drive (secondary) 2 Optical* drive 3 External# 3.5" 5 Internal hard drive (primary) *An optical drive is a CD-ROM, CD-R/RW, DVD-ROM, DVD-R/RW, or CD-RW/DVD Combo drive. #Optional media card reader illustrated. 6-12 415606-001 Service Reference Guide, dx2200 MT
![](/manual_guide/products/compaq-dx2200-hp-compaq-dx2200-mt-business-pc-1st-edition-f0b254e/54.png)