Cuisinart DLC-10S DLC-10S Manual - Page 5
machine., control, remove, pusher, assembly, Cover, place, allowing - motor
UPC - 086279102560
View all Cuisinart DLC-10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Locking Tab 6 Hold pusher with white Slide Lock toward you. Slide pusher over feed tube on cover and push locking tab down until locking tab clicks. CAUTION: Machine must be unplugged wnen you practice locking and unlocking pusher. Repeated locking and unlocking with machine plugged in is never neces sary in normal use and will make machine inoperable. Plug in machine. Move control switch up to ON position to start motor. Move control switch down to OFF position to stop motor. Move control switch down to PULSE position and release it for pulse/chopping. If machine doesn't start, make sure it is plugged in and work bowl, cover and pusher assembly are locked in position. 8 To remove cover, hold pusher assembly with thumb away from two locking tabs. Turn and lift. The work bowl won't come off until the cover is unlocked. 6 Apply even pressure to large pusher while holding lever down at PULSE position, and push food through. To remove pusher assembly, hold it with thumb on large tab. Press firmly on tab and lilt straight up. Cover will stay in place, allowing you to reload feed tube. 8 To remove disc from stem, slide button up as far as it will go and turn stem counterclockwise.