Cuisinart EM-200 EM-200 Manual - Page 10

10

TIP:

The amount of foam required will vary

depending on the drinks being made. For

example, a cappuccino requires more foam than

a latte.

10.

Stop the steam immediately by turning the

steam and hot water control dial to the

center position.

IMPORTANT:

Do not boil the milk.

11.

Remove the pitcher,

immediately wipe the

steam nozzle and

wand with a clean

damp cloth (28) and

purge a small amount

of steam.

USING THE HOT WATER

FUNCTION

1.

Place the cup or container under the steam/

hot water nozzle and activate the hot water

function

by turning the steam and hot

water control dial to the hot water setting (38).

2.

Once you have dispensed the required

amount of hot water into the cup or container,

stop the hot water by turning the steam/hot

water control dial to the

O

position.

3.

Remove the cup or container and swing the

steam/hot water wand over the drip tray to

catch any drips of water.

CLEANING AND

MAINTENANCE

Always turn the espresso maker off and remove

the plug from the electrical outlet before cleaning.

Never immerse unit in water or other liquid. To

clean, simply wipe with a clean damp cloth and

dry before storing.

CLEANING THE FILTERS, PORTAFILTER

HOLDER AND BREW HEAD

holder should be rinsed under water

immediately after use to remove all coffee

particles. You may also use the grey cleaning

pin (smaller pin) to clear the opening.

with the portafilter holder in place, but

without any ground coffee, to rinse out

any lingering coffee particles.

with a damp cloth to remove any coffee particles.

CLEANING THE OUTER HOUSING/CUP

WARMING PLATE

The outer housing and cup warming plate

can be cleaned with a soft, damp cloth.

Do not use any scouring agents or harsh

cleaners.

CLEANING THE GRATE ON THE DRIP TRAY

The grate should be removed, emptied and

cleaned frequently, particularly when the drip

tray is full.

water and rinsed thoroughly.

Use a non-

abrasive washing liquid

(do not use abrasive

cleaners, pads or cloths which can scratch

the surface).

CLEANING THE DRIP TRAY

The drip tray can be

removed after the grate

is removed and then

cleaned with a soft,

damp cloth (do not use

any scouring agents or

harsh cleaners).

NOTE:

Do not clean any of

the parts or accessories in

the dishwasher.

CLEANING THE STEAM WAND

always be cleaned after

steaming milk.

with a damp cloth,

then with the steam

wand directed back

into

the drip tray, momentarily

set the steam and

hot water control dial to the hot water setting.

This will release any remaining milk from

inside the steam wand.

and hot water control

dial is in the

O

position.

Press the power button

off, unplug the power

cord and allow the

machine to cool.

28

Cuisinart EM-200 EM-200 Manual - Page 10

Using The Hot Water, Function, Cleaning And, Maintenance - portafilter

Page 10 highlights