Cuisinart EM-200 EM-200 Manual - Page 7
Programming Your, Espresso Machine - programmable espresso maker
UPC - 086279014344
View all Cuisinart EM-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PROGRAMMING YOUR ESPRESSO MACHINE The Cuisinart® Programmable Espresso Maker has programming capabilities. Based on café settings, the single and double espresso functions are set at 1.5 and 3.0 oz. However, by following a few simple steps, you can pre-program your perfect serving size down to the ounce. Programming Single Espresso 1. Prepare the portafilter holder with the one cup filter basket (8) and fill with finely ground espresso (9). Using the tamping tool, tamp the coffee grinds (10), or use a single pod of espresso coffee with the pod filter holder. Secure the portafilter holder to the brew head (11-12). 8 9 10 11 12 13 2. Place a cup under both pouring spouts. 3. To begin programming press the program button. The light around the program button will show a constant blue light. 4. Press the single espresso button once to start the espresso pour (13).The light around the single espresso button will flash. 5. Allow the espresso to pour until it reaches the desired level. Once that is reached, stop the espresso pour by pressing the single espresso button. A beep will signify that the new setting for the single espresso operation has been programmed and stored in the machine's memory. 6. The espresso machine 14 will then return to normal operation mode and is ready to make another espresso at the push of a button. Programming Double Espresso 1. Prepare the portafilter holder. Fit it with the two-cup filter basket (8) and fill with finely ground coffee (9). Using the tamping tool, tamp the coffee grinds (10). Secure the portafilter holder to the brew head (11-12). 2. Place two cups under both pouring spouts. 3. To begin programming press the program button. The light around the program button will show a steady blue light. 4. Press the double espresso button once to start the espresso pour (14). The light around the button will flash. 5. Allow the espresso to pour until it reaches the desired level. Once that level is reached, stop the espresso pour by pressing the double espresso button. A beep will signify that the new setting for the double espresso operation has been programmed and stored into the machine's memory. 6. The espresso machine will then return to normal operation mode and is ready to make another espresso at the push of a button Resetting the Factory Settings To revert to the original factory settings: 1. Press the program button once. 2. Press and hold down the manual button and program. 3. Continue holding down manual and program buttons for approximately 3 seconds or until you hear 2 beeps. When you hear the 2 beeps, the light around the and buttons will flash, and after that, the program light becomes solid. The espresso machine 7