Cuisinart SBC-1000 SBC-1000 Manual - Page 8
Cooking And Blending, Blending Cold Ingredients, Cleaning And Maintenance - parts
View all Cuisinart SBC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
COOKING AND BLENDING 1. Place the motor base of your blender on a flat, sturdy surface. It is important that the surface be clean and dry. Assemble the blender by following the Assembly instructions (page 4). Once the jar is assembled and is in position on the motor base, plug the blender into an electrical outlet. 2. Press the On/Off button. The blender is now in Standby mode. 3. Select the required time per the recipe. This can be adjusted throughout the cooking process, but a time must be selected to start the heater initially. 4. Add ingredients according to the recipe. You may add more ingredients by lifting the measuring cup from the lid and dropping ingredients through the lid opening. When making soup, fill the contents of the glass jar only to the 48-oz. level marked HOT. Always replace the measuring cup after adding ingredients. See Recipe Tips and Hints for cooking soups (recipe book, page 2). CAUTION: Do not put hands into blender jar with blender plugged in. NOTE: Do not use anything other than the measuring cup to cover or close lid opening. This prevents obstruction to necessary steam vents. CAUTION: When blending hot liquids ensure vents in lid opening are clear and intended pour spouts are closed (lid is secured). 5. To remove blender jar lid, lift edge of cover upwards. Lifting from measuring cup will not remove lid. CAUTION: Be careful of hot steam when removing lid. 6. To stir ingredients while cooking, use the Stir button. 7. When cooking time has finished, the blender will beep 4 times. 8. To blend soup always start on speed 1, gradually increasing to speed 2 or 3. Use only these recommended speeds when blending hot items. Turn the Blending control dial to stop when the desired consistency is reached. 9. Unplug the blender from the electrical outlet. Never remove the blender jar from the motor base until the blender is off. Do not twist the blender collar from the blender jar when removing jar from motor base. CAUTION: When removing the jar use caution. The area underneath the collar may be extremely hot. BLENDING COLD INGREDIENTS 1. Place the motor base of your blender on a flat, sturdy surface. It is important that the surface be clean and dry. Assemble the blender by following the Assembly instructions (page 4). Once the jar is assembled and is in position on the motor base, plug the blender into an electrical outlet. 2. Press the On/Off button. The blender is now in Standby mode. 3. Add all necessary ingredients to the blender jar and replace the cover. You may add more ingredients by lifting the measuring cup and dropping ingredients through the lid opening. Replace the measuring cup after adding ingredients. Do not put hands into blender jar with blender plugged in. NOTE: Add liquid ingredients first then follow with solid ingredients. This will provide more consistent blending and prevent unnecessary stress on the motor. 4. To remove blender jar lid, lift the edge of lid upwards. Lifting from measuring cup will not remove lid. 5. Turn the Blending control dial to your desired speed or use the Pulse function. Turn the Blending control dial to Stop when the desired consistency is reached. 6. The Stir function can be used as well for gentle blending. NOTE: To dislodge food, do not use a spatula until you have turned the blender off, use a plastic or wooden spatula to help remove food lodged around the cutting assembly. Replace the lid and measuring cup and continue blending, if necessary. Make sure the spatula is not inside the blender jar before blending. 7. Unplug the blender from the electrical outlet. Never remove the blender jar from the motor base until the blender is off. Do not twist the blender collar from the blender jar when removing jar from motor base. CLEANING AND MAINTENANCE NOTE: Jar collar with blade assembly is NOT dishwasher safe. Do not submerge in water or other liquids. CAUTION: Be extremely careful when cleaning around the blades. They are very sharp. Always unplug your Cuisinart® Blend and Cook Soupmaker from the electrical outlet before cleaning. The blender is made of corrosion-resistant parts that are easy to clean. Before first use and after every use, clean each part thoroughly. Periodically check all parts before reassembly. If any part is damaged or blender jar is chipped or cracked, DO NOT USE BLENDER. Remove the blender jar from the motor base by lifting straight up and away. Twist off the jar collar with blade assembly by turning counterclockwise. Carefully remove the rubber gasket. 6