D-Link DCS-4603 User Manual - Page 29
Enable, UPnP Port, Forwarding, Enable PPPoE, User Name, Password, Access Name, for Stream 1~3
View all D-Link DCS-4603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Section 3: Configuration Enable Enabling this setting allows the camera to add port forwarding entries into UPnP Port the router automatically on a UPnP capable network. Forwarding: Enable PPPoE: Enable this setting if your network uses PPPoE. User Name / Enter the username and password for your PPPoE account. Re-enter your Password: password in the Confirm Password field. You may obtain this information from your ISP. HTTP Port: The default port number is 80. Access Name The default name is video#.mjpg, where # is the number of the stream. for Stream 1~3: HTTPS Port: You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443. Authentication: Choose to enable or disable RTSP digest encryption. Digest encryption uses MD5 hashes. RTSP Port: The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the IP address of your camera. Enable CoS: Enabling the Class of Service setting implements a best-effort policy without making any bandwidth reservations. Enable QoS: Enabling QoS allows you to specify a traffic priority policy to ensure a consistent Quality of Service during busy periods. If the Network Camera is connected to a router that itself implements QoS, the router's settings will override the QoS settings of the camera. D-Link DCS-4603 User Manual 29