D-Link DCS-4603 User Manual - Page 41
Add Event, Event name, Enable this, event, Priority, Delay, Trigger, Video Motion, Detection, Periodic
![]() |
View all D-Link DCS-4603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Section 3: Configuration Add Event Create and schedule up to three events with their own settings here. After making any changes, click the Save Settings button to save your changes. Event name: Enter a name for the event. Enable this Select this box to activate this event. event: Priority: Set the priority for this event.The event with higher priority will be executed first. Delay: Specify the delay time before allowing this event to be triggered again. This is used for both motion detection events and digital input triggers. Trigger: Specify the input type that triggers the event. Video Motion Detection: Selecting this will trigger the event when motion is detected during live video monitoring. Make sure you have enabled motion detection and specified what part of the image to monitor for motion. For more details, refer to Motion Detection on page 35. Periodic: Selecting this will trigger the event in specified intervals. The trigger interval unit is in minutes. System Boot: Selecting this will trigger an event when the system boots up. Event Specify when you want to monitor for this event. Select which days to Schedule: monitor for this event, then select Always or enter the time interval to monitor for the specified event. D-Link DCS-4603 User Manual 41
![](/manual_guide/products/dlink-dcs4603-user-manual-0ee2a67/41.png)