D-Link DCS-4603 User Manual - Page 32
Image Setup, Enable Privacy, Mirror, Anti Flicker, White Balance, Exposure
View all D-Link DCS-4603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 3: Configuration Image Setup In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video. Enable Privacy The Privacy Mask setting allows you to specify up to 3 rectangular areas Mask: on the camera's image to be blocked/excluded from recordings and snapshots. You may click and drag the mouse cursor over the camera image to draw a mask area. Right clicking on the camera image brings up the following menu options: • Disable All: Disables all mask areas • Enable All: Enables all mask areas • Reset All: Clears all mask areas. Mirror: This will mirror the image horizontally. Flip: This will flip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well. Anti Flicker: Select the frequency used by your power lines to avoid camera flicker or moving bars in your video. Generally, if your power outlets are 220 to 240 V, you should select 50 Hz. If your power outlets are 100 to 120 V, you should select 60 Hz. White Balance: Use the drop-down box to change white balance settings to help balance colors for different environments. You can choose from Auto, Outdoor, Indoor, and Fluorescent. Exposure Mode: Changes the exposure mode. Use the drop-down box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low Noise option will focus on creating a high-quality picture without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. D-Link DCS-4603 User Manual 32