D-Link DCS-4603 User Manual - Page 35
Motion Detection, Save Settings, Select All, Clear All, Restore
![]() |
View all D-Link DCS-4603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Section 3: Configuration Motion Detection Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity settings that determine whether motion is detected by the camera or not. After making any changes, click the Save Settings button to save your changes. Enable Video Select this box to enable the motion detection feature of your camera. Motion: Sensitivity: Specifies how sensitive motion detection will be from 0% to 100%. A low sensitivity setting means that there must be large changes between two images in order to detect motion, and a high sensitivity setting means that even small changes will cause motion to be detected. Draw Motion Use your mouse to click and drag on the areas that you would like to Area: monitor for motion. Erase Motion To erase a motion detection area, simply click on the red square that you Area: wish to remove. Right click on the camera image to bring up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-4603 User Manual 35
![](/manual_guide/products/dlink-dcs4603-user-manual-0ee2a67/35.png)