D-Link DCS-4603 User Manual - Page 44
Advanced, ICR and IR
![]() |
View all D-Link DCS-4603 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Section 3: Configuration Advanced ICR and IR Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light environments. Automatic: The Day/Night mode is set automatically. You can use the Sensitivity dropdown box to set when the camera will switch to Night mode. The text box to the right shows what lighting conditions are currently being detected by the camera for reference. You can refresh this status by clicking the Refresh button. Day Mode: Day mode enables the IR Cut Filter. Night Mode: Night mode disables the IR Cut Filter. Schedule Set up the Day/Night mode using a schedule. The camera will enter Day Mode: mode at the starting time and return to Night mode at the ending time. IR Light The camera can enable or disable the IR (infrared) light according to your Control: preferences. This setting provides additional controls depending on your specific application. Off: The IR light will always be off. On: The IR light will always be on. Sync with ICR: The IR light will turn on when the ICR filter is disabled (night mode). Schedule: The IR light will turn on or off according to the schedule that you specify below. D-Link DCS-4603 User Manual 44
![](/manual_guide/products/dlink-dcs4603-user-manual-0ee2a67/44.png)