D-Link DGS-3620-28TC-SI Product Manual - Page 412
DHCPv6 Relay, DHCPv6 Relay Global Settings
View all D-Link DGS-3620-28TC-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide DHCPv6 Relay DHCPv6 Relay Global Settings This window is used to configure the DHCPv6 relay function on the Switch. To view this window, click Network Application > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings as shown below: Figure 9-22 DHCPv6 Relay Global Settings window The fields that can be configured are described below: Parameter Description DHCPv6 Relay State Click the radio buttons to enable or disable the DHCPv6 relay function. DHCPv6 Relay Hops Count (1-32) Enter the number of relay agents that have to be relayed in this message. The default value is 4. Click the Apply button to accept the changes made for each individual section. DHCPv6 Relay Settings This window is used to configure the DHCPv6 relay state of one or all of the specified interfaces, and add or display a destination IPv6 address to or from the switch's DHCPv6 relay table. To view this window, click Network Application > DHCP > DHCPv6 Relay > DHCPv6 Relay Settings as shown below: Figure 9-23 DHCPv6 Relay Settings window The fields that can be configured are described below: Parameter Description Interface Name Enter the name of the IPv6 interface. Tick the All check box to select all IPv6 interfaces. DHCPv6 Relay State Use the drop-down menu to enable or disable the DHCPv6 relay state of the interface. DHCPv6 Server Enter the DHCPv6 server IPv6 address. 402