D-Link DGS-3620-28TC-SI Product Manual - Page 462

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Unit Use the drop-down menu to select a unit for receiving the firmware. Select All for all units. RCP Server IP Enter the RCP server IP address used. Source File Enter the location and name of the Source File. User Name Enter the remote user name on the RCP server. Destination File Enter the location and name of the Destination File. Boot Up Tick the check box to set it as a boot up file. Click Download to initiate the download. Download Firmware from HTTP This window allows the user to download firmware from a computer to the Switch and updates the switch. Figure 12-7 Download Firmware from HTTP window The fields that can be configured are described below: Parameter Description Unit Use the drop-down menu to select a unit for receiving the firmware. Select All for all units. Source File Enter the location and name of the Source File or click the Browse button to navigate to the firmware file for the download. Destination File Enter the location and name of the Destination File. Boot Up Tick the check box to set it as a boot up file. Click Download to initiate the download. Upload Firmware The following window is used to upload firmware from the Switch. Upload Firmware to TFTP This window allows the user to upload firmware from the Switch to a TFTP Server. 452