D-Link DGS-3627 Product Manual - Page 301
BGP AS Path Access List Settings, BGP AS Path Access List Settings window
UPC - 790069293696
View all D-Link DGS-3627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch To configure BGP confederation settings on the Switch, complete the following fields: Parameter Description Confederation Identifier (0-65535) Enter an Autonomous System number which is used to specify a BGP confederation. If it is set to zero, the BGP confederation number is deleted. By default, this setting is zero. Confederation Peer Toggle between Add and Delete. Action Confederation Peer AS Number List (165535) Enter one or multiple AS number partitions, each separated by a comma. These are the Autonomous System numbers for BGP peers that will belong to the confederation. Click Apply to implement changes made. BGP AS Path Access List Settings This window is used to configure an Autonomous System path access list. To view this window, click L3 Features > BGP > BGP AS Path Access List Settings, as shown below: Figure 4- 143. BGP AS Path Access List Settings window To configure BGP AS path access list settings on the Switch, complete the following fields: Parameter Description List Name Enter an Autonomous System path access list name. Click Apply to implement changes made. 285