D-Link DGS-3627 Product Manual - Page 428

Host (0-50) xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch allowed on each port at the same time. Aging Time (1-1440 min) This parameter specifies the period of time a host will keep in authenticated state after it successes to authenticate. Enter a value between 1 and 1440 minutes. The default setting is 1440 minutes. To maintain a constant Port Configuration, tick the Infinite check box. Idle Time (1-1440 min) This parameter specifies the period of time during which there is no traffic for an authenticated host and the host will be moved back to the unauthenticated state. Enter a value between 1 and 1440 minutes. A value of Infinite indicates the Idle state of the authenticated host on the port will never be checked. The default setting is Infinite. Block Time (0-300 sec) This parameter specifies the period of time a host will keep in a blocked state after it fails to authenticate. Enter a value between 0 and 300 seconds. The default setting is 60 seconds. Click Apply to implement changes made. JWAC User Account This window is used to configure JWAC user accounts on the Switch. To view this window, click Security > Japanese Web-based Access Control (JWAC) > JWAC User Account, as shown below: Figure 7- 82. JWAC User Account window To configure JWAC user settings, click the Add button, which will open the following window: Figure 7- 83. Create a New JWAC User Account window The following fields can be configured: Parameter Description User Name VID(1-4094) Enter a username of up to 15 alphanumeric characters. Enter the VLAN ID of the Account you wish to create. 412