D-Link DGS-3627 Product Manual - Page 383

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch 802.1X User Settings This window allows the user to set different local users on the Switch and set a global limitation on the maximum number of users that can be learned via 802.1X authentication. To view this window, click Security > 802.1X > 802.1X User Settings, as shown below: Figure 7- 28. 802.1X User Settings window This window allows setting of the following features: Parameter Description Max User (1-4000) Enter the maximum number of users to be allowed. Tick the No Limit check box to specify that there will be the maximum number of users. By default there is no limit. User Name Password Confirm Password Enter the User Name of the new profile to be created. Enter a password for the new user. Re-enter the password entered in the field above. Click Apply to implement the changes. The new User will be displayed in the 802.1X User Table. To remove a user, click the corresponding button. NOTE: The user must first globally enable 802.1X in the DGS-3600 Web Management Tool window before setting up ports. Initialize Port(s) Existing 802.1X port and MAC settings are displayed and can be configured using the window below. To view this window, click Security > 802.1X > Initialize Port(s), as shown below: 367