D-Link DGS-3630 User Manual - Page 130

Firmware Upgrade from TFTP, Source File, Browse, Destination File, Upgrade

Page 130 highlights

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Source File Destination File Description In this field the source firmware file's filename and path will be displayed after selection. To navigate to the location of the firmware file located on the local PC, either double click in the text box or click the Browse button. Enter the destination path and location where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Upgrade from TFTP This window is used to initiate a firmware upgrade from a TFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from TFTP, as shown below: Figure 11-3 Firmware Upgrade from TFTP Window The fields that can be configured are described below: Parameter TFTP Server IP Source File Destination File Description Enter the TFTP server IP address here. When select the IPv4 option, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the source filename and path of the firmware file located on the TFTP server here. This field can be up to 64 characters long. Enter the destination path and location where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Upgrade from FTP This window is used to initiate a firmware upgrade from an FTP server. 123

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
123
The fields that can be configured are described below:
Parameter
Description
Source File
In this field the source firmware file’s filename and path will be displayed after
selection. To navigate to the location of the firmware file located on the local
PC, either double click in the text box or click the
Browse
button.
Destination File
Enter the destination path and location where the new firmware should be
stored on the Switch. This field can be up to 64 characters long.
Click the
Upgrade
button to initiate the firmware upgrade.
Firmware Upgrade from TFTP
This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click
Tools > Firmware Upgrade & Backup > Firmware Upgrade from TFTP
, as
shown below:
Figure 11-3 Firmware Upgrade from TFTP Window
The fields that can be configured are described below:
Parameter
Description
TFTP Server IP
Enter the TFTP server IP address here. When select the
IPv4
option, enter the
IPv4 address of the TFTP server in the space provided. When the
IPv6
option
is selected, enter the IPv6 address of the TFTP server in the space provided.
Source File
Enter the source filename and path of the firmware file located on the TFTP
server here. This field can be up to 64 characters long.
Destination File
Enter the destination path and location where the new firmware should be
stored on the Switch. This field can be up to 64 characters long.
Click the
Upgrade
button to initiate the firmware upgrade.
Firmware Upgrade from FTP
This window is used to initiate a firmware upgrade from an FTP server.