D-Link DGS-3630 User Manual - Page 27
System > System Log > System Log Settings, Buffer Log State
![]() |
View all D-Link DGS-3630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > System Log > System Log Settings, as shown below: Figure 3-18 System Log Settings Window The fields that can be configured for Log State are described below: Parameter Log State Description Select the enable or disable the global system log state here. Click the Apply button to accept the changes made. The fields that can be configured for Buffer Log Settings are described below: Parameter Buffer Log State Severity Discriminator Name Write Delay Description Select to globally enable or disable the buffer log state here. Options to choose from are Enable, Disabled, and Default. When selecting the Default option, the global buffer log state will follow the default behavior. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. This specifies the name of the discriminator profile that will be used to filter buffer log messages based on the filtering criteria specified within that profile. Enter the log write delay value here. This value must be between 0 and 65535 seconds. By default, this value is 300 seconds. Tick the Infinite option, to disable the write delay feature. Click the Apply button to accept the changes made. The fields that can be configured for Console Log Settings are described below: Parameter Console Log State Description Select to globally enable or disable the console log state here. 20
![](/manual_guide/products/dlink-dgs3630-user-manual-7703634/27.png)