D-Link DGS-3630 User Manual - Page 76

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Instance Priority Description After clicking the Edit button, enter the Instance Priority value here. The range is from 0 to 61440. Click the Edit button to re-configure the specific entry. Click the Apply button to accept the changes made. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MSTP Port Information This window is used to display and configure the MSTP port information settings. To view the following window, click L2 Features > STP > MSTP Port Information, as shown below: Figure 5-20 MSTP Port Information Window The fields that can be configured are described below: Parameter Port Cost Priority Description Select the port number that will be cleared here. After clicking the Edit button, enter the cost value here. This value must be between 1 and 200000000. After clicking the Edit button, select the priority value here. Options to choose from are 0 to 240. By default this option is 0. A lower value has higher priority. Click the Clear Detected Protocol button to clear the detected protocol settings for the port selected. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Link Aggregation Understanding Port Trunk Groups Port trunk groups are used to combine a number of ports together to make a single high-bandwidth data pipeline. The Switch supports up to 32 port trunk groups with up to 12 ports in each group. 69