D-Link DGS-3630 User Manual - Page 46

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide SNMP Group Table Settings An SNMP group created with this table maps SNMP users to the views created in the SNMP View Table Settings window. To view the following window, click Management > SNMP > SNMP Group Table Settings, as shown below: Figure 4-13 SNMP Group Table Settings Window The fields that can be configured are described below: Parameter Group Name Read View Name User-based Security Model Description Enter the SNMP group name here. This name can be up to 32 characters long. Spaces are not allowed. Enter the read view name that users of the group can access. Select the security model here. Options to choose from are SNMPv1, SNMPv2c, and SNMPv3. • SNMPv1 - Select to allow the group to use the SNMPv1 security model. • SNMPv2c - Select to allow the group to use the SNMPv2c security model. • SNMPv3 - Select to allow the group to use the SNMPv3 security model. Write View Name Security Level Enter the write view name that the users of the group can access. When selecting SNMPv3 in the User-based Security Model drop-down list, this option is available. • NoAuthNoPriv - Specify that there will be no authorization and no encryption of packets sent between the Switch and a remote SNMP manager. • AuthNoPriv - Specify that authorization will be required, but there will be no encryption of packets sent between the Switch and a remote SNMP manager. • AuthPriv - Specify that authorization will be required, and that packets sent between the Switch and a remote SNMP manger will be encrypted. Notify View Name Enter the notify view name that users of the group can access. The notify view describes the object that can be reported its status via trap packets to the group user. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. 39