D-Link DKVM-16 Manual - Page 10
Step 7, Step 8, Step 9, Step 10 - power supply
UPC - 790069254987
View all D-Link DKVM-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Hardware Installation (Continued) Step 7 Using the included 3-in-1 cable, locate the keyboard connector (purple) and connect one end to the PS/2 keyboard port on the back panel of the computer, and the other end to the PC1 PS/2 keyboard port on the back panel of the DKVM-16. If your computer has an AT type keyboard port, you will need to use the PS/2 to AT keyboard adapter included with the DKVM-16. Back of PC Step 8 Double-check all of your connections. Make sure that the keyboard and mouse cables are connected to the correct ports. Step 9 Repeat steps 5 through 8 for the remainder of the computers. Step 10 Attach the power supply to the DKVM-16 unit and plug the other end into an electrical receptacle. When you see the LED for Port 1 light up and hear a beep, switch on your PCs and monitor. Note: To maintain stable operation of the DKVM-16, please keep the unit powered using the power adapter when in use, especially when the DKVM-16 is in a daisychain stack. 10