D-Link DKVM-16 Manual - Page 12
Using the DKVM-16 - reset
UPC - 790069254987
View all D-Link DKVM-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Using the DKVM-16 The "Power On" State of the DKVM-16 When you power on the KVM switch, it will prompt you for the password; the default value is eight zeros - "00000000". Please enter eight zeros and enter the same value in the retype field. Note: If you are not familiar with the operation of the OSD manual, please do not change the password (i.e. keep the default eight zero value). Otherwise, if you forget your set password, you will need to contact the supplier (D-Link) to have the unit reset. The Push Buttons Pressing the button allows you to cycle fowards and backwards through all the ports. 1 2 3 14 15 16 Bank Port Status PC Port Status The Display LEDs When you select one of the sixteen PC ports and the PC is shut down or disconnected, the selected port LED will flash. When you select one of the sixteen PC ports and the PC is powered on, the selected port LED is lit. 12