D-Link DSR-250v2 Product Manual 2 - Page 22
Device Management, Select All IP Addresses, IP Address Range enter an IP range
View all D-Link DSR-250v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Field Administrator Administrator timeout Guest Guest timeout Apply Cancel Description It displays the name of the admin. Enter the timeout value in minutes for the Administrator account. It displays the name of the guest. Enter the timeout value in minutes for the Guest account. Click Apply to save your settings. Click Cancel to revert to the previous settings. Device Management Enable this feature to manage the router from a remote location, using HTTPS . Both HTTPS and access can be restricted to a subset of IP addresses. The router administrator can define a known PC, single IP address, or range of IP addresses to access the GUI with HTTPS. The opened port for SSL traffic can be changed from the default of 443 while defining the allowed remote management IP address range. The fields available on this page are as follows: Field LAN IP access via WAN Enable remote management HTTPS port SSH SNMP Allowed remote access Apply Description Device management Select the checkbox to enable this feature. This feature configures the router to provide the LAN IP Access from the WAN side. Remote management setup Select the checkbox to enable this feature. Enter the port for HTTPS access. The default port is 443. Select the checkbox to enable SSH (Secure Shell) protocol to access the CLI over the network from a remote host. Select the checkbox to enable SNMP for remote management. Select All IP Addresses, IP Address Range (enter an IP range), or Only Selected PC (enter an IP address). Click Apply to save your settings.