D-Link DSR-250v2 Product Manual 2 - Page 85
Ending IP address
![]() |
View all D-Link DSR-250v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Actions You can edit or delete the selected policy. Click Add icon to add a new policy. This opens the Add application control policy configuration page. To delete multiple entries, select the checkboxes of the application control policies you want to delete, and click Delete icon. The fields available on the Add application control policy configuration page are as follows: Field Policy Name Policy Schedule Policy scope Network IP address Starting IP address Ending IP address Interface Captive portal user QoS Traffic management Priority Max bandwidth rate (Kbps) Description Enter a name to identify the policy. Policy rule setup Select the policy rule. It could be either allow or block. It allows you to set a schedule when you want to apply the policy. To configure a new schedule, refer to the Schedule section. Policy scope setup Select either Global or By feature as the policy scope. The global policy affects all types of traffic matching the selected application(s). If the By feature is selected as the Policy type, the following fields will be available. Select any one of the following networks: Single: If you select this option, enter the IP address. IP range: If you select this option, enter the starting IP address and ending IP address. Interface: If you select this option, select the interface from the drop-down list. Enter the IP address. This field is available when the Network is Single. Enter the starting IP address of the IP range. This field is available when the Network is IP range. Enter the ending IP address of the IP range. This field is available when the Network is IP range. Select the interface from the drop-down list. This field is available when the Network is Interf ace. Enable or disable the Captive Portal option. Enabling this option allows all the Captive Portal clients to follow this policy. Enable or disable the QoS option to select Bandwidth Rate or Priority for the traffic accessing through the selected application. Select Rate or Priority for the traffic accessing through the selected application. Specify the priority as Low, Medium, or High. Enter the maximum bandwidth rate.
![](/manual_guide/products/dlink-dsr250v2-product-manual-94156a1/85.png)