D-Link DSR-250v2 Product Manual 2 - Page 68
Session Limiting, Add bandwidth management, Policy type, Low Medium
![]() |
View all D-Link DSR-250v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
The fields available on the Add bandwidth management page are as follows: Field Name Policy type WAN Interface Interface Management type Priority Max. bandwidth rate (Kbps) Min. bandwidth rate (Kbps) Service Traffic selector match type Interface IP address Subnet mask MAC address Schedule policy Apply Cancel Description Enter a name for your profile. This identifier is used to associate the configured profile to the traffic selector. Select the policy type (Inbound or Outbound). Select which of the available WAN interfaces you want to associate this profile with. This field appears when Outbound is selected as the Policy type. Select which of the available interfaces you want to associate this profile with. This field appears when Inbound is selected as the Policy type. Select either Priority or Rate. If you select Priority, specify the priority. It could be Low, Medium, or High. If you select Rate, enter the maximum bandwidth rate. If you select Rate, enter the minimum bandwidth rate. Traffic selector Select a service from the drop-down list. This field is available when you select Outbound as the Policy type. Select any one of the following match types: IP address: Select this option to associate this traffic selector with an IP Address of a LAN device. Once selected, enter the IP address of the LAN device. MAC address: Select this option to associate this traffic selector with a specific MAC address on the LAN. Once selected, enter a valid MAC Address. Interface: If this option is selected, select the interface. If you select Interface, select an interface from the drop-down list. Enter the IP address of the source associated with this profile. Enter the subnet mask. If you select MAC address, enter the MAC address of the source associated with this profile. It allows you to define the time and day when the traffic shaping rule is to be applied. Click apply to save your settings. Click cancel to revert to the previous settings. Session Limiting The Session Limiting section displays a list of configured session limiting profiles. It allows a user to limit the number of sessions per IP address, range of IP addresses, or interface through the device. When the session limit is reached, a warning message is displayed to users for a session initiated from a web browser. Session Limiting configuration consists of profile name, source type, schedule, and maximum sessions.
![](/manual_guide/products/dlink-dsr250v2-product-manual-94156a1/68.png)