D-Link DUB-E100 User Manual - Page 22
Linux 2.6.x - d link linux
UPC - 790069243943
View all D-Link DUB-E100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Linux 2.6.x To verify if the DUB-E100 driver is properly installed: 1. Load the DUB-E100 module by the following command: [root@localhost linux2.6.14_rev101]# modprobe asix 2. List the loaded modules with the specified pattern "asix": [root@localhost linux2.6.14_rev101]# lsmod | grep asix Then you should get the reply similar to the following lines: asix 26880 0 usbnet 20616 1 asix mii 9600 2 asix,e100 usbcore 114896 5 asix,usbnet,usb_storage,echi_hcd,uhci_hcd If you still have problem on installing the D-Link USB DUB-E100 driver, please contact D-Link Technical Support. 20
Linux 2.6.x
To verify if the DUB-E100 driver is properly installed:
1. Load the DUB-E100 module by the following command:
[root@localhost linux2.6.14_rev101]# modprobe asix
2. List the loaded modules with the speci
fi
ed pattern “asix”:
[root@localhost linux2.6.14_rev101]# lsmod | grep asix
Then you should get the reply similar to the following lines:
asix
26880 0
usbnet
20616 1 asix
mii
9600 2 asix,e100
usbcore
114896 5 asix,usbnet,usb_storage,echi_hcd,uhci_hcd
If you still have problem on installing the D-Link USB DUB-E100 driver, please contact D-Link Technical
Support.
20