D-Link DWC-1000-WCF-LIC User Guide - Page 51
Basic Configuration Step #6. Use SSID with RADIUS
View all D-Link DWC-1000-WCF-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Basic Configuration Basic Configuration Step #6. Use SSID with RADIUS To use SSID with RADIUS authentication, perform the following procedure. 1. Click ADVANCED > SSIDs. The NETWORKS page appears. 2. Under the SSID column, click the SSID you want to edit. 3. At the next NETWORKS page, update the SSID name in the SSID field if needed. 4. Complete the fields in Table 3-3 and click Save Settings. Your access point is configured to use RADIUS authentication server. Table 3-9. RADIUS Settings Field RADIUS Authentication Server Name RADIUS Accounting Server Name RADIUS Use Network Configuration RADIUS Accounting Description Enter the name of the RADIUS server that the virtual access point uses for access point and client authentication. Any RADIUS information you configure for the wireless network overrides the global RADIUS information configured on the Wireless Global Configuration page. The wireless controller acts as the RADIUS client and performs all RADIUS transactions on behalf of the access points and wireless clients. Range: 32 alpha-numeric characters, including spaces, underscores, and dashes Enter the name of the RADIUS server that the virtual access point uses for reporting wireless client associations and disassociations. Range: 32 alpha-numeric characters, including spaces, underscores, and dashes Click Enable. Click Enable. Where to Go from Here After installing the basic configuration procedures, the wireless controller is ready for operation using the factory default settings in Appendix B. These settings should be suitable for most users and most situations. The wireless controller also provides advanced configuration settings for users who want to take advantage of the more advanced features of the wireless controller. The following sections list the wireless controller's advanced settings. Users who do not understand these features should not attempt to reconfigure their wireless controller, unless advised to do so by the technical support staff. For more information about advanced configuration settings, refer to the DWC-1000 Wireless Controller User Manual and the wireless controller Helpful Hints in the web management interface (see ―Web Management Interface Layout‖ on page 31). 51 DWC-1000 Wireless Controller User's Guide