D-Link DWC-1000-WCF-LIC User Guide - Page 79
Table 4-6. SPILLOVER CONFIGURATION Fields
![]() |
View all D-Link DWC-1000-WCF-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Advanced Configuration Settings 2. Under Port Mode, click Load Balancing. Then use the adjacent drop-down list to select one of the following port balancing methods: - Round Robin - new connections to the Internet alternate between available links. If you select this setting, complete the Option Failure Detection Method settings (see Table 4-5 on page 77). - Spillover Mode - a single Option link is used for all connections until the bandwidth threshold is reached, after which point the other Option link is used for new connections. If you select this setting, complete the Option Failure Detection Method settings (see Table 4-5) and SPILLOVER CONFIRMATION settings (see Table 4-6). 3. Click Save Settings. Table 4-6. SPILLOVER CONFIGURATION Fields Field Load Tolerance Max Bandwidth Description Enter the percentage of maximum bandwidth after which the wireless controller switches to the secondary Option port. Enter the maximum bandwidth tolerable by the Primary Option. If the bandwidth falls below the load tolerance value of configured Max Bandwidth, the wireless controller switches to the secondary Option port. 79 DWC-1000 Wireless Controller User's Guide
![](/manual_guide/products/dlink-dwc1000wcflic-user-guide-7c6ff0f/79.png)