D-Link DWL-G710 Product Manual - Page 15
Site Survey, SSID Service Set, Identifier, AP Name, WEP Encryption, WEP Mode, TX Rates, Apply, - access point
UPC - 790069271427
View all D-Link DWL-G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Using the Configuration Menu (continued) AP Name You may choose to rename your DWL-G710, especially if you have more than one DWL-G710 on your network. Wireless SSID (Service Set Identifier) Enter the SSID of the network you wish to repeat. Site Survey - Click Site Survey to receive a list of networks that are available for connection. Please see the screen on the following page for more information on this feature. Channel - Select the channel from the pulldown menu. All devices on the network must share the same channel in order to communicate. WEP - For a level of security, select Enable Encryption to use WEP (Wired Equivalent Privacy) on the network. All devices on the network, and the access point, must share the same WEP selection - either Enable or Disable. WEP Encryption - Select either 64- or 128-bit length. WEP Mode - Select ASCII or Hexadecimal mode and then input the appropriate digits or letters into each Key field. You can create up to 4 keys. Select the key you wish to use. Hexadecimal digits consist of the numbers 0-9 and the letters A-F ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers from 0-127 WPA-PSK/WPA2-PSK - Select either WPA-PSK or WPA2-PSK. Select this to secure your network using a passphrase and dynamic key changes. The passphrase must be between 8 - 63 characters. TX Rates - Select the transmission rate for the network. Apply - Click Apply to save the changes. 15