D-Link DWR-512 User Manual - Page 19
Static IP, IP Address, Subnet Mask, Default Gateway, Primary DNS Server, Secondary DNS, Server - default ip
View all D-Link DWR-512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Section 3 - Configuration Static IP Choose this Internet connection if your ISP assigns you a static IP address. After modifying any settings, click Save Settings to save your changes. IP Address: Enter the IP address assigned to your network connection. Subnet Mask: Enter the subnet mask. Default Gateway: Enter the default gateway. Primary DNS Server: Enter the primary DNS server. Secondary DNS Server: MTU: Enter the secondary DNS server. You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 1500. MAC Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DWR-512 User Manual 14