D-Link DWR-730 User Manual - Page 36

Con WEP - ip address

Get D-Link DWR-730 PDF manuals and user guides View all D-Link DWR-730 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Section 4 - Security Configure WEP It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Settings on the left side. 2. Next to Security Mode, select WEP. 3. Next to WEP Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all your wireless devices. You may enter up to 4 different keys. 4. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DWR-730 User Manual 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
32
D-Link DWR-730 User Manual
Section 4 - Security
Configure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of
the router (192.168.0.1).
Click on
Wireless Settings
on the left side.
2. Next to
Security Mode
, select
WEP
.
3. Next to
WEP
Key 1
, enter a WEP key that you create. Make sure you enter this key exactly on all your
wireless devices. You may enter up to 4 different keys.
4. Click
Save Settings
to save your settings. If you are configuring the router with a wireless adapter,
you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as
you did on the router.