D-Link DWR-730 User Manual - Page 38

Con WPA-PSK/WPA2-PSK - d link ip

Get D-Link DWR-730 PDF manuals and user guides View all D-Link DWR-730 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Section 4 - Security Configure WPA-PSK/WPA2-PSK It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Settings on the left side. 2. Next to Security Mode, select WPA-PSK or WPA2-PSK. 3. Next to Pre-Shared Key, enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. 4. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK (or WPA2-PSK) on your adapter and enter the same passphrase as you did on the router. D-Link DWR-730 User Manual 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
34
D-Link DWR-730 User Manual
Section 4 - Security
Configure WPA-PSK/WPA2-PSK
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.
Log into the web-based configuration by opening a web browser and entering the IP
address of the router (192.168.0.1).
Click on
Wireless Settings
on the left side.
2. Next to
Security Mode
, select
WPA-PSK
or
WPA2-PSK
.
3. Next to
Pre-Shared Key
, enter a key (passphrase). The key is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces.
Make sure you enter this key exactly the same on all other wireless clients.
4. Click
Save Settings
to save your settings. If you are configuring the router with a wireless
adapter, you will lose connectivity until you enable WPA-PSK (or WPA2-PSK) on your
adapter and enter the same passphrase as you did on the router.