DeLonghi ECAM23210SB Owner Manual - Page 13

bubbles to escape (fig. 31). 5. Insert the filter in the filter housing (fig. 32A) and press as far as it will go. 6. Close the tank with the lid (fig. 32B), then replace the tank in the machine. When you install the filter, you must notify the appliance of its presence. 7. Press the P button to enter the menu; 8. Turn the selection knob until the and lights come on. 9. Press the OK button. 10. Press the button to confirm the selec- tion. 11. Place a container (min. capacity: 100 ml) un- der the cappuccino maker. 12. Turn the steam knob and press the but- ton. 13. At the end of delivery, the light flashes. Close the knob and the appliance returns automatically to the "ready for coffee" state. The new filter is active and you can now use the coffee maker. Replacing the filter When the light flashes, after two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the filter: 1. Remove the old filter; 2. Remove the new filter from the packaging. 3. Turn the date indicator disk (see fig. 30) until the next 2 months of use are displayed (the filter lasts about two months); 4. Refill the tank; 5. Insert the filter in the water tank and immerse it completely, sloping it to enable the air bubbles to escape (fig. 31); 6. Place the filter in the filter housing (fig. 32A) and press as far as it will go. Close the tank with the lid (fig. 32B), then replace the tank in the machine; 7. Place a container (min. capacity: 100 ml) under the cappuccino maker. 8. Press the P button to enter the menu; 9. Turn the selection knob until the and lights come on. 12. Turn the steam knob and press the button. 13. At the end of delivery, the light flashes. Close the knob and the appliance returns automatically to the "ready for coffee" state. The new filter is now active and you can use the coffee maker. Removing the filter If you want to continue using the appliance wi- thout a filter, you must remove it and notify the appliance of its removal as follows: 1. Extract the tank and exhausted filter; 2. Press the P button to enter the menu; 3. Turn the selection knob (fig. 8) until the and lights come on; 4. Press the button. The OK light flashes; 5. Press the button to confirm use of the appliance without the filter; 6. Press the button to exit the menu. TECHNICAL SPECIFICATION Voltage: 120V~ 60Hz Absorbed power: 1350W Pressure: 15 bars Water tank capacity: 50.7 fl. oz. max. Size LxHxD: 2,38x3,4x4,3 in. Cable length: 11 ft. Weight: 20,22 lb. Coffee beans container capacity: 5,3 oz. max. 10. Press the button. The OK light flashes. 11. Press the tion. button to confirm the selec- 18