DeLonghi ECAM23210SB Owner Manual - Page 6

Auto-off Please note The appliance is set to turn off automatically if not used for 2 hours. The time can be changed so that the appliance switches off after 15 or 30 minutes, or after 1, 2 or 3 hours. 1. Press the P button to enter the menu; 2. Turn the selection knob (fig. 8) until the light comes on; 3. Press the button to select the function; 4. Turn the selection knob until the lights corre- sponding to the number of hours before the appliance goes off automatically come on: 15 minutes 30 minutes 1 hour 2 hours 3 hours 5. Press the button to confirm; 6. Press the button to exit the menu. Auto-off is programmed. 3. Press the button. The OK light flashes. 4. Press the button to activate, or to deactivate, the energy saving mode; 5. Press the button to exit the menu. When the function is active, the E light remains on. Please note! A few seconds may elapse between energy saving mode and delivery of the first coffee as the appliance must heat up again. Setting water hardness For instructions on setting water hardness, see page 17. Install filter For instructions on how to install the filter, see the section "Installing the filter" on page 17. Replacing the filter For instructions on how to replace the filter, see the section "Water softener filter" on page 17. Setting the temperature To modify the temperature (low, medium, high) of the water used to make the coffee, proceed as follows: 1. Press the P button to enter the menu; 2. Turn the selection knob until the light comes on; 3. Press the button; 4. Turn the selection knob until the lights corre- sponding to the required temperature come on: LOW MEDIUM HIGH 5. Press the 6. Press the button to confirm; button to exit the menu. Energy Saving Use this function to enable or disable energy saving mode. When activated, it reduces energy consumption while the machine is on in compliance with current European regulations. 1. Press the P button to enter the menu; 2. Turn the selection knob until the light E co- mes on. Default values (reset) This resets all menu settings and programmed quantities back to the default values. 1. Press the P button to enter the menu; 2. Turn the selection knob until the lights come on; 3. Press the button. The OK light flashes; 5. Press the button to confirm and exit. Statistics function This displays statistics relating to the machine. To display, proceed as follows: 1. Press the P button to enter the menu; 2. Turn the selection knob until the light comes on; 3. Press the button; 4. When the selection knob is turned and the corresponding light flashes, the following information is displayed: - how many coffees have been made; - how many times the machine has been descaled; - the total number of litres of water deli- vered; 11