DeLonghi ECAM23210SB Owner Manual - Page 14
Explanation Of Lights
View all DeLonghi ECAM23210SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
EXPLANATION OF LIGHTS LIGHT POSSIBLE CAUSE Insufficient water in the tank. REMEDY Fill the tank with water and insert it correctly, pushing it as far as it will go until it clicks into place. The tank is not correctly in place. Insert the tank correctly and press as far as it will go. The grounds container (A13) is full. Empty the grounds container and drip tray, clean and replace. Important: when removing the drip tray, the grounds container MUST be emptied, even if it contains few grounds. If this is not done, when you make the next coffee, the grounds container may fill up more coffee than expected and clog the machine. After cleaning, the grounds Remove the drip tray and insert the grounds container has not been replaced. container. The grinding is too fine and the coffee is delivered too slowly or not at all. Repeat coffee delivery and turn the grinding adjustment knob (fig. 10) one click clockwise towards "7" while the coffee mill is in operation. If after making at least 2 coffees delivery is still too slow, repeat the correction procedure, turning the grinding adjustment knob another click until delivery is correct (see the section: Adjusting the coffee mill on page 29). If the problem persists, turn the steam knob to the I position and deliver water from the cappuccino maker. 19