DeLonghi PAC WE125 Owner Manual - Page 5
Preparing For Use
View all DeLonghi PAC WE125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PREPARING FOR USE The instructions below will enable you to prepare your air conditioner for operation as efficiently as possible. Before use, make sure the air intake and outlet grilles are unobstructed. Air-conditioning without installation Just a few simple steps and your comfort is ensured with your appliance: • Fit the air exhaust hose in the housing at the back of the appliance (fig. 1). 1 2 1 3 2 1 • If you have a sash window, place the window bracket (T) on the window sill, extend the window bracket fully within the window frame, fix the window bracket by using the locking pin then lower the window onto the window bracket. Insert the window outlet (N) of the exhaust hose (K) into the slot, then connect the hose to the air conditioner (fig. 4). 4 • Fit the window outlet (N) to the end of the hose (K). • Place the air conditioner near a window or French window. • Adjust the length of the hose to reach the window. • Make sure the air exhaust hose is unobstructed. • Open the window or French window slightly and position the outlet (fig. 2). 2 • Thanks to the locking pins, it's possible to use the window bracket also for sliding windows. Position the hole of the window bracket so to allow a correct installation of the exhaust hose (see figure 5). 5 • If you have a double window, use the sucker (Q) provided to hold the two parts of the window together (fig. 3). 5