Dell 2150cn User Manual - Page 201
Reset Defaults, Printer Settings, Values, Security, Set Password, SSL/TLS, IPsec, Filter IPv4, Purpose - factory reset
UPC - 884116047919
View all Dell 2150cn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize NVRAM of the printer from Reset Defaults in the Printer Settings menu. Values: Initialize NIC Click the Start button to initialize NVRAM, revert network NVRAM Memory and settings to the factory default settings, and reboot the network restart printer. capability. Restart Printer Click the Start button to reboot the printer. Security The Security tab includes Set Password, SSL/TLS, IPsec, 802.1x and IP Filter (IPv4). Set Password Purpose: To set or change the password that is required to access the setup parameters of the printer from the Dell Printer Configuration Web Tool. Set the password of the operator panel from Panel Lock in the Printer Settings. This page can also be displayed by clicking Set Password in the Left Frame. NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM). Values: Administrator Password Re-enter Administrator Password Access denial by the authentication failure of the Administrator Sets the password using up to 10 alphanumeric characters. Confirms the set password. Sets the amount of time the administrator should wait for the access to the printer setup from Dell Printer Configuration Web Tool. Sets the time period from 5 up to 255 seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode is disabled. Dell Printer Configuration Web Tool 199