Dell 7330dn System Administrator Guide - Page 71

PJL Command @PJL XPERSONALJOB @PJL XPROOFJOB @PJL XSAVEDJOB @PJL XSECUREJOB @PJL XIGNOREFF @PJL XLINETERMINATION=value @PJL XMBFSIZE=value @PJL XMEDIASOURCE=value @PJL XMEDIATYPE=value @PJL XPCLTRAYSWITCH=value @PJL XPCLPAPERSRCx = y Additional PJL Commands Values Description n/a n/a n/a n/a ON, OFF ON, OFF ANY or any supported media size, such as LETTER, STATEMENT, and EXECUTIVE ANY, TRAYn ANY or any supported media type, such as PAPER and LABEL ON, OFF x is 0, 1, 2, 3, 4, 5, 6, 7, 8, 20, 21, 22, 23, which is the number in the &l#H tray selection commands y is -1 for AutoSelect, 0 for the current tray (eject page), 1 for Tray 1, 2 for Tray 2, etc., and 99 for the factory defaults Starts a Personal Print job. Starts a Proof Print job. Starts a Saved Print job. Starts a Secure Print job. Ignores FormFeed commands when printing PCL blank pages. Terminates a line. Sets the media size for Tray 1. Sets the media source. Sets the media type. Switches trays when a tray becomes empty. If AutoSelect is chosen as the paper source (tray) in PCL, then tray switching is always active, regardless of the value. When the current tray becomes empty, the printer attempts to switch to another tray containing the same size and type of paper. This command only takes effect when a specific tray, such as Tray 2, is selected in the job. When this command is ON, tray switching still occurs when the tray becomes empty. When this command is OFF, no switching occurs and the user is prompted to load paper. Overrides the tray selected in the &l#H PCL tray selection commands. Dell 7330 Mono Laser Printer System Administrator Guide B-6