Dell 7330dn User Guide - Page 95
Printing Transparencies from Trays 2-5, Transparency
UPC - 884116005896
View all Dell 7330dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Printing on Specialty Media 2. Insert the transparencies long-edge feed into Tray 1 (MPT) or Tray 6. MAX 7330-118 7330-142 Tray 1 (MPT) Long-Edge Feed Tray 6 Long-Edge Feed Note: Do not load paper above the fill line inside the tray. 3. Adjust the paper guides to the size of the transparencies if necessary. 4. If prompted on the control panel, press the OK button to accept the paper size and type that are shown. If you have changed the paper size or type, do the following: a. Select Change setup, and then press the OK button. b. Select Transparency, and then press the OK button. c. Select the paper size, and then press the OK button to save your selection. 5. In the printer driver, select either Transparency as the paper type or the tray you loaded as the paper source. Printing Transparencies from Trays 2-5 1. Fan the transparencies to release sheets that may stick together. 7330-170 Dell 7330 Mono Laser Printer 4-36