Dell AW2310 User's Guide - Page 27
Setting Up the Monitor - optx
View all Dell AW2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Back to Contents Page Setting Up the Monitor Alienware OptX™ AW2310 User's Guide Attaching the Stand Connecting the Monitor Organizing the Cables and Attaching the Cable Cover Removing the Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached from the monitor when it is shipped from the factory. Remove the monitor cover and place the monitor on it. 1. Fit the two tabs on the upper part of the stand into the grooves on the back of the monitor. 2. Lower the stand so that the stand snap onto the monitor mounting area. Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect your monitor to your computer using ONLY ONE of the following cables: the DVI (digital DVI-D) or the HDMI cable. Use both the cables only when they are connected to two different computers with appropriate video systems. Connecting the White DVI Cable