Dell Alienware Aurora R12 Service Manual - Page 34
W Power-supply unit, Removing the 1000 W power-supply unit
View all Dell Alienware Aurora R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Steps 1. Place the power supply on the chassis. 2. Align the screw holes on the power-supply unit with the screw holes on the chassis. 3. Replace the four screws (#6-32) that secure the power-supply unit to the chassis. 4. Lift and rotate the power-supply unit cage away from the chassis 5. Connect the processor-power cable and system-board power cable to the system board. 6. Connect the power cables to the hard drives. 7. Rotate the power-supply unit cage towards the chassis 8. Slide the power-supply unit cage release latches towards the locked position. 9. Align the screw holes on the power-supply unit bracket with the screw holes on the power-supply unit cage. 10. Replace the two screws (#6-32) that secure the power-supply unit bracket to the power-supply unit cage. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. 1000 W Power-supply unit Removing the 1000 W power-supply unit Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. 34