Dell Alienware Aurora R12 Service Manual - Page 84
Power-button board, Removing the power-button board
View all Dell Alienware Aurora R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Steps 1. Align the screw hole of the AlienFX LED board to the screw hole on the front bezel. 2. Replace the four screws (M3x4) that secure the AlienFX LED board to the front bezel. 3. Connect the AlienFX LED board cable from a Y-cable. Next steps 1. Install the front bezel. 2. Install the top-cover. 3. Install the right-side cover. 4. Install the left-side cover. 5. Follow the procedure in After working inside your computer. Power-button board Removing the power-button board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. 3. Remove the right-side cover. 4. Remove the top-cover. 5. Remove the front bezel. About this task The following images indicate the location of the power-button board and provides a visual representation of the removal procedure. 84