Dell Alienware m15 R2 Service Manual - Page 52
Keyboard, Removing the keyboard
View all Dell Alienware m15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Steps 1. Place the power-button assembly and its cable in the slot on the palm-rest assembly. 2. Place the power-button bracket on the power-button assembly. 3. Replace the three (M2x1.9) screws that secure the power-button bracket to the palm-rest assembly. 4. Adhere the power-button assembly cable on the palm-rest assembly. Next steps 1. Install the system board. 2. Install the right I/O-board. 3. Install the left I/O-board. 4. Install the battery. 5. Install the rear I/O-cover. 6. Install the 2230 solid-state drive. (if applicable) 7. Install the 2280 solid-state drive. (if applicable) 8. Install the base cover. 9. Follow the procedure in After working inside your computer. Keyboard Removing the keyboard Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) 5. Remove the rear I/O-cover. 6. Remove the battery. 7. Remove the left I/O-board. 8. Remove the right I/O-board. 9. Remove the system board. 52