Dell B1265dnf Mono Laser User Manual - Page 116
IPv4 configuration using SetIP Macintosh, Apply, Network Configuration Report, System, Preferences
View all Dell B1265dnf Mono Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Wired network setup 7 Enter the machine's new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. IPv4 configuration using SetIP (Macintosh) Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall. The following instructions may vary from your model. Find the machine's MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 117) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. 8 Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct. 1 Connect your machine to the network with a network cable. 2 Insert the Installation CD-ROM, and open the disk window, select MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html. 3 Double-click the file and Safari will automatically open, then select Trust. The browser will open the SetIPapplet.html page that shows the printer's name and IP address information. 4 Click the icon (third from left) in the SetIP window to open the TCP/ IP configuration window. 5 Enter the machine's new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. 2. Using a Network-Connected Machine 118