Dell B3465dnf Mono Smart Card Authentication Client Administrators Guide - Page 14
Configuring User Validation Mode settings
![]() |
View all Dell B3465dnf Mono manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Configuring Smart Card Authentication Client 14 Type the mappings in the text file in this format: IP address, space, server host name. For example, 0.0.0.0 HostName. You can assign multiple host names to an IP address. For example, 0.0.0.0 HostName1 HostName2 HostName3. You cannot assign multiple IP addresses to a host name. To assign IP addresses to groups of host names, type each IP address and its associated host names on a separate line of the text file. For example: 123.123.123.123 HostName1 HostName2 456.456.456.456 HostName3 3 Click Apply. Configuring User Validation Mode settings You can secure your printer using the Smart Card without the need to maintain a full Kerberos authentication system. The user inserts the Smart Card into the reader and then enters the PIN in the printer home screen. If the Smart Card PIN matches the PIN entered in the home screen matches, then the user can access the application. 1 Access the Smart Card Authentication Client application configuration settings from the Embedded Web Server. 2 Under the Login Screen heading, set "Login Type" to Smart Card Only, and then set the Authentication mode to PIN ONLY. 3 From the Domain Controller Validation menu, select Use device certificate validation. Note: The Online Certificate Status Protocol (OCSP) must not be configured. 4 Under the Advanced Setting heading, set "E-mail From Address" to Smart Card, and then clear the Wait for user information check box. Note: Session User ID must be set to None, and the "Other User Attributes" and "Group Authorization List" fields must be empty. 5 Click Apply.
![](/manual_guide/products/dell-b3465dnf-mono-smart-card-authentication-client-administrators-guide-e5bf3e6/14.png)