Dell Brocade 5100 Brocade 7.3.0 Fabric OS Message Reference Guide - Page 218

5 BLS-1003 BLS-1003 Message Message Type Class Severity Probable Cause Recommended Action An IPsec/IKE policy was deleted. AUDIT | LOG CFG INFO Indicates that an Internet Protocol Security (IPsec) or Internet Key Exchange (IKE) policy was deleted and the configuration file was updated. No action is required. BLS-1004 Message Message Type Severity Probable Cause Recommended Action Tape Read Pipelining is being disabled slot () port () tunnel (). LOG INFO Indicates that the Fabric OS version on the remote end of the tunnel does not support Tape Read Pipelining. No action is required. BLS-1005 Message Message Type Severity Probable Cause Recommended Action S,P() [OID 0x]: : port faulted due to SFP validation failure. Please check if the SFP is valid for the configuration. LOG ERROR Indicates a deteriorated small form-factor pluggable (SFP) transceiver, an incompatible SFP transceiver pair, or a faulty cable between the peer ports. Verify that compatible SFP transceivers are used on the peer ports, the SFP transceivers have not deteriorated, and the Fibre Channel cable is not faulty. Replace the SFP transceivers or the cable if necessary. 196 Fabric OS Message Reference 53-1003140-01