Dell Brocade 5100 Brocade 7.3.0 Fabric OS Message Reference Guide - Page 824

5 SEC-1303 SEC-1303 Message Message Type Severity Probable Cause Recommended Action This software version does not support security. LOG INFO Indicates the currently installed software version does not support the Brocade Secure Fabric OS feature. Run the firmwareDownload command to update the firmware to the latest version for your specific switch. Verify the firmware you are installing supports the Brocade Secure Fabric OS feature. SEC-1304 Message Message Type Severity Probable Cause Recommended Action This switch has no security license. LOG INFO Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Run the secFabricShow command to verify the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1305 Message Message Type Severity Probable Cause Recommended Action This switch has no zoning license. LOG INFO Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and the local validation finds the error in the security database. This is a rare occurrence. Run the secFabricShow command to verify the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. 802 Fabric OS Message Reference 53-1003140-01