Dell Brocade 5100 Brocade 7.3.0 Fabric OS Message Reference Guide - Page 426

5 FCR-1084 FCR-1084 Message Message Type Severity Probable Cause Recommended Action The resume retry count is exhausted for the domain . LOG WARNING Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been the result of this issue. No action is required. FCR-1085 Message Message Type Severity Probable Cause Recommended Action HA sync lost as remote CP does not support FCR based matrix. LOG ERROR Indicates that the remote control processor (CP) has older firmware, which does not support the FCR-based matrix while the local CP has the feature enabled. This is causing the loss of the high availability (HA) synchronization. Disable the FCR-based matrix or upgrade the remote CP. FCR-1086 Message Message Type Severity Probable Cause Recommended Action HA sync lost as remote CP does not support 8 Gbps-capable FC based EX_Ports. LOG ERROR Indicates that the remote control processor (CP) has older firmware, which does not support 8 Gbps-capable FC based EX_Port. This is causing the loss of the high availability (HA) synchronization. Disable 8 Gbps-capable FC based EX_Ports or upgrade the remote CP. 404 Fabric OS Message Reference 53-1003140-01